How Much Does It Cost To Wrap A Sprinter Van?

How Much Does It Cost To Wrap A Sprinter Van?

At the point of acquiring a brand new Sprinter Van, its exterior comes wearing a spotless coat of paint in your color of choice.

After some time though, with each drive and continuous use, the van ages and begins to face some degree of wear and tear. It can be anything from the color fading to the coat of paint peeling off. Dents and accidental scratches may also occur. 

To continue to use the van, you will have to do something about the new state of its exterior. You can choose to use spray-on paints or paint with rollers and brushes. A more effective intervention, however, is wrapping. 

How much does it cost to get a van wrapped?

Due to the various factors that determine the ultimate cost, it’s difficult to come to state a particular amount. However, it typically costs anywhere between $3,500 and $5,000 to wrap a Sprinter van. Partial wrap ranges from $1,500 to $2500. 

RELATED: Report about Sprinter luxury rentals!

How much does it cost to wrap a commercial van?

First of all, what makes a van a commercial one?

If the van is designed to carry 16 passengers (including the driver) or has a GVWR of 26,001 lbs. or more, it’s considered a commercial van or a commercial motor vehicle (CMV).

That said, it will cost about $3,000 to $5,000 to wrap a commercial van. 

What does it mean to wrap a Sprinter van?

Like repainting with spray-on and rollers, van wrapping is a method of changing or improving the outward look of your Sprinter (or any other vehicle for that matter).

Here, you won’t have to use the complex and potentially costly methods of respraying or roller-painting. Wrapping involves a partial or complete covering of your Sprinter van using a chosen quality of vinyl film. 

Is wrapping a van expensive? 

This is one question people, from readers and car owners, ask every time. Once they learn that wrapping their van is an option, the next they all want to know is if it’s cost-effective. Well, this article will give a simple yet nuanced answer to this question. 

The best way to approach this question is to first and foremost consider all the factors that go into wrapping a van. Some of these factors include: 

  • Are there templates to use? 
  • Will there be guides to determine the square footage of the wrap?
  • Does the van require partial coverage or do you prefer a full one? 
  • What kind of van is it (in this case, it’s a Sprinter)? 
  • How long will the wrap be on for?
  • What quality of the material should be used? 

These questions and more are the factors that determine the ultimate cost of your wrap. 

RELATED: Can You Drive A Sprinter Van With Car Licence?

Something to note

Always be mindful of the quality of the material used, it goes a long way to determine how long the wrap will last. It’s not enough that a particular company is affordable.

Do your homework and find out if they are using high-end 3M or Avery materials. More so, if they are employing the most suitable application for your van. 

How to wrap a Sprinter van: step by step

While it may be the most affordable way of improving or changing a van’s exterior look, wrapping a van still takes money as well as effort, and time.

It’s an intricate process, one that should be undertaken by only professionals. You can also DIY if you have the basic technical know-how. Every step counts and they are as follows. 

Prepare

This is arguably the most important step in wrapping your van. Get it wrong, and it will mess up the ultimate appearance of your vehicle. Pick the perfect location.

Get all the equipment and gears you would need. Decide on the quality and quantity required (make room for a 10% error margin). Get the wrap ready. Etc. 

Fix dents

Fill in those dents on your Sprinter and straighten them all out before wrapping. This will give a better result to the wrap job. 

Clear out rusts

Detect the areas with rust and sand them down. Applying a rust preventive (anti-rust) solution is recommended. Then, stylishly follow it up with a primer.  

Strip the van

The next step will require removing components off your van that may hinder smooth wrapping. Including lights, blinkers, bumpers, decorative strips, fender flares, spray nozzles, mud flaps, hubcaps, windshield wipers, and door handles windows if possible. 

Sand down

Get the body of the van to be as perfect as possible. So, using 400- or 600-grit sandpaper and a sanding block, carefully sand the gloss of the Sprinter van. Do it by hand for better results. 

RELATED: What Mattress Size Fit In Models of Sprinter Vans?

Clean the car

A clean van surface makes for the best result. So, like in painting, it’s critical to make the van’s surface as clean as possible. The reason is so that it holds the vinyl material, as well as giving a smooth display. 

Use a degreaser to remove the initial layer of crud. Then apply 70% isopropyl alcohol to get rid of the leftover fine particles and dust, leaving you with a rather smooth surface.  

Wrap

Finally, it’s time for the main activity, wrapping. You have to be careful to get a bubble-free look. Starting from the middle, lay the wrap on the van. Use your squeegee and heat gun appropriately and when needed.

Cut off the excess vinyl wrap. Tuck the edges. For the final time, heat the wrap and set it in place. Lastly, clean the surface with alcohol and inspect for errors. Then, you are done! 

Wrapping remains the cleanest and most efficient method. Although, it’s still subject to debate in some quarters. 

What are the benefits of wrapping a Sprinter van? 

What are the benefits of wrapping a Sprinter van? 

Here are some of the advantages of wrapping a van and why you should consider it. 

Cheaper

Generally, between a high-quality van wrap and a high-quality paint job, the latter will cost more. The difference can be as much as a couple of thousand dollars. This assertion, of course, is made under the assumption that the size of the van is the same in both cases. 

Faster turnaround time

Installing a vinyl wrap takes less time than painting. 

Looks better 

Wraps are versatile and make your van easily stand out. 

Preview privilege 

With vinyl wraps, you get to see what your van will look like before it’s installed. Cool right? 

RELATED: Different Passenger Vans Models, Specs for Rent?

More detailed

As you may already know, wraps are simply more detailed than the usual painting. You get to perfectly replicate logos and pictures with wraps. 

It’s the new paint job!

For both commercial purposes and cosmetic jobs, wraps are the new paint jobs. It’s just better and easier to pull off with wraps than painting. 

People Also Asked!

The following are frequently asked questions about wrapping a Sprinter van. 

How much does it cost to wrap an LWB Sprinter?

LWB here stands for long-wheelbase. It will cost anywhere between $3,000 and $5,000 to wrap a long-wheelbase Sprinter van.  

How long does a wrap last before it wears out?

How Much Does It Cost To Wrap A Commercial Van?Typically, a wrap will last 3 to 5 years before it starts to wear off. 

It’s important to note that the wrap’s lifespan will depend upon the quality of vinyl materials used and how well it was installed on the van. Maintenance tends to also influence the lifespan.  

Is it cheaper to get a sprinter wrapped or painted?

Wrapping a Sprinter is less expensive than painting it. 

How much does it cost to DIY wrap a cargo van?

It depends on the size of the cargo van and the quality of the material you are using to wrap it.  

RELATED: The Complete Van Renting Report Online?

How strong is a vinyl wrap?

Apart from looking really great on your van, vinyl wraps are incredibly long-lasting. It will take more than a few scratches for it to show signs of wear. They are generally considered more durable than car paint.