Do Budget Trucks Have To Stop At Weigh Stations?

Do Moving Trucks Have To Stop At Weigh Stations?

Weigh stations are an essential part of every Truck driver’s journey, and it is of necessity that they use these stations as they continue on their route. According to CVC section 410, all rental trucks, which Budget trucks are, must stop at weigh stations. 

A majority of the truck scale facilities on the highway or freeway make it clear with signs that remind the truck driver of using the weigh station. On these signs are written, ‘’All Daily Rental/Moving Trucks Must Stop At Scales When open.’’

RELATEDHere is how to become truck driver?

What Does it Mean to Stop at Weigh Stations?

Weigh stations are checkpoints set up by the government and relevant transport agencies on the highway to help monitor and check the weight of moving trucks.

Although there are weight limits for Moving trucks, we cannot trust most Truck companies to abide by the rules set.  Therefore trucks and commercial vehicles weighing above 10,000 pounds are expected to stop at these stations for a check.

The goal of these weigh stations on the highway is to check the weight of the vehicles and inspect them. Ensuring they meet the set guidelines.

Why do Trucks stop at weight station?

The highways can handle a specific range of weight or load from moving vehicles. Weight stations make sure that motorists do not exceed this range.

Therefore, trucks stop at weigh stations to ensure that they are not overweight. Overweight trucks will often cause severe damage to the highways (roads and bridges). Several states collect taxes based on the weight of transported goods.

RELATEDBudget Truck Sale Offers Better Deals for Used Vehicles!

Benefits of using truck weigh stations

Weigh stations for trucks are found along highways in the country. However, contrary to popular belief, they perform a task that supersedes just checking the weight of moving trucks.

They are pivotal to ensuring that truck drivers are not overworked, but alert and awake to continue their journey. They also make sure that all commercial trucks obey the set-down federal regulations.

Furthermore, weigh stations often run a surprise check of the truck driver’s log. The essence of this check is to know the state of the driver.

Many things come into play here – How long the driver has been on the road, and how many breaks he has had. This check is necessary, and it helps prevent truck drivers from overworking themselves.

When the rest periods of a driver are too short, he may fall asleep on the wheels, leading to an accident. Therefore, the Federal Motor Carrier Safety Administration (FMCSA) is deeply committed to looking out for fatigued driving amongst truck drivers.

They do this by keeping an eye on the rest hours of truck drivers. If a truck driver is found guilty of fatigue driving, the driver and the company he works under will receive a fine.

RELATEDKnown these Facts Before You Tow Car With Rented Trucks!

Do Budget trucks also stop at weigh stations?

Budget trucks are rental trucks, and as with all rental trucks, they expect to stop at weigh stations on the highway. 

These weigh stations perform the primary duty of ensuring that trucks do not exceed the weight limit for the highway route.

Therefore, the weigh stations prevent unsafe and overweight trucks from plying the highways and moving from one state to another. This action makes the roads a lot safer for all drivers on them.

People’s Also Asked!

How to go through a weigh station?

Going through a weigh station is easy. Once you approach an open weigh station, move to the right lane and get in line for the scale. If your truck has a PrePass, we advise you make use of it.

A PrePass will speed up your process. However, not all weigh stations have a PrePass service. Lastly, pay attention to the speed limit and obey it as you drive towards the scale. 

What does weigh station bypass mean?

A driver gets a bypass when the requirements for weight, size, safety, etc., are in place. The driver will see a screen that has “bypass” written on it. This tells the driver that they can bypass the weigh station. 

How does weigh station PrePass work?

A PrePass works by the help of a radio frequency identification (RFID) transponder which sits on the truck’s windshield. Another option can be through the use of the PrePass app on a mobile phone or tablet. The system will send either a red or green light to the transponder or the app in the truck.

RELATEDWhy Budget and Costco Partnership Is Best for You!

What are weigh station procedures?

Weigh stations are assigned checkpoints usually found along a highway. The purpose of a weigh station is to check the weight of the trucks, making use of a truck scale. You will often find a weigh station sitting right off a major highway or road. 

As you approach, you will see a sign pointing you in the right direction. On arrival at this checkpoint, a DOT representative or member of the state highway patrol will be weighting to perform the exercise.

How to go through a weigh station properly?

The weight of the truck is checked here using truck scales. Newer scales do not require the truck to stop for weighing. On these new scales, the weighing of trucks occurs as you drive through the weighing scale. However, older scales require the truck to come to a complete halt. 

Furthermore, you will often find on most scale facilities a sign that reminds drivers of this, “All Daily Rental/Moving Trucks Must Stop at Scales When Open.” Nevertheless, pick-up rental trucks do not have to stop. If the rental truck is a flatbed or utility bed, then it should stop.

RELATEDWhat Is Budget Drop Off After Hours for Rental?

What Are Weigh Station Procedures?

What are the Truck Weigh Station rules?

Truck weigh station rules are simple. All commercial trucks should stop at every open weigh station. Furthermore, some states demand that trucks weighing 10,000 pounds or more must stop at all weigh stations. 

However, we may see some slight variance in the truck’s weight in other states. Some states like Colorado have a weight requirement of 26,000 pounds.

What are the core weigh station requirements?

We advise you that as you plan to head out to make a delivery as a truck driver, it is of great essence that you research the weigh station requirements for each state. 

As you journey across regions, you must know that every state has different regulations and requirements. Therefore, it is only wise that you stay-up-date.

Furthermore, weight is not the only thing DOT (Department of Transportation) looks out for in ensuring safety. You will also find out things such as tire-load safety, bridge height, road width, and a variety of other on-the-road factors. Generally speaking, width restrictions are 102 inches. However, some states require 96 inches or less.

Do rental trucks have to stop at weigh stations?

Yes, all rental trucks have to stop at weigh stations. All weigh stations have signs that tell you in plain English that “all rental trucks must stop for inspection.” This procedure is also in line with CVC section 410.

What happens if a truck does not stop at a weigh station?

When a truck driver does not stop at a weigh station to follow the procedure, he will likely get pulled over by a law enforcement officer.

This officer will direct him to return to the skipped weigh station and do the needful. Failure to stop at a weigh station will attract a fine and lead to an additional delay to your fleet. 

Furthermore, after the inspection of your truck, if you fall short in certain areas, these violations will affect your score in Federal Motor Carrier Safety Administration programs.

This program is a cardinal tool used for rating trucking operations on their safety and how prone they are to undergo inspection.

Do trucks have to stop at weigh stations?

Ideally, the trucks expected to stop at all weigh stations in most states are trucks weighing up to 10,000 pounds or more.

Other states differ as to what weight range should stop at weigh stations. However, they all agree that all commercial trucks should stop at every open weigh station on their route. 

RELATEDBetween Penske & Budget Rental – Which Offer Better Deals?

Why do some trucks not go through the weigh station?

Trucks that weigh 10,000 pounds or above must stop at weigh stations. Nonetheless, some states have a different requirement for the weight of trucks that get pulled over at the weigh station. 

Furthermore, when a driver skips a weigh station, the consequences are often grave, the station will call his company, and he might get fired. The transponder in your truck reveals your identity when you default. 

Most companies assign a PrePass to each truck, and if you receive a red sign, they have your details. Notwithstanding, truck drivers with a PrePass often bypass the scale, but the scale has a way to monitor each truck. 

When it is time for these trucks to get inspected, the PrePass will ensure they run through the scale to receive and pass a complete mechanical or driver inspection.

What states require all trucks to stop at weigh stations?

Vermont, Utah, Pennsylvania, Nebraska, Michigan, Florida, California, Alabama. These states require all rental trucks to stop at weigh stations. 

However, in Florida and California, these trucks are expected to stop at all agricultural stations. Other states vary in the trucks they need to stop based on the weight. Most of them check trucks weighing from 10,000 pounds upwards. 

What are weigh station procedures?

You will often find a weigh station located off the major highway or road. Weigh stations often have a sign that points you in the direction you should take.

On arrival at the checkpoint, a DOT representative or a member of the state highway patrol will check the weight of your truck. The weighing of your vehicle happens on a scale which you will either park over or drive through.

RELATEDWhy Tow Dollies so Cheaper to Rent at Budgets?

What are the truck weigh station rules or requirements?

What Are The Truck Weigh Station Rules?The main requirement for trucks across most states requires that trucks weighing 10,000 pounds or more should stop at every weigh station. 

The weight changes for some states, and it may be higher. However, all states agree that commercial trucks should all stop at every open weigh station.

How to go through a weigh station properly?

On arrival at any open weigh station, drivers should get in the right lane and get in line for the scale. You must take note of the speed limit as you pass through the weigh scale and oblige it. 

Furthermore, if your truck has a PrePass assigned, most weigh stations will inform you if the PrePass service is available. If the PrePass service is available, it will speed up your process. 

Final Words

All commercial trucks are required to stop at every weigh station on their route. Budget trucks are commercial trucks. Therefore, they fall into this category. 

In most states, all trucks weighing 10,000 pounds or above should stop at weigh stations. Bypassing a weigh station will attract a fine to the driver or the company where he works. Trucks with a Prepass enjoy better weigh station services if the Prepass service is available in that station.